Home :: Electronic Boost Control Solenoid 3-Port Hyundai Genesis Coupe 2.0T 2010-14

Electronic Boost Control Solenoid 3-Port Hyundai Genesis Coupe 2.0T 2010-14

Electronic Boost Control Solenoid 3-Port Hyundai Genesis Coupe 2.0T 2010-14
Quick Specs
Achieves Much Quicker Boost Rate -flows 10% more than the competition
Plug and Play into OEM Harness -no splicing wires like with other BCS'!
Factory Fit for Clean Install
Works Safely with Factory Hyundai ECU -built with a custom coil to match ECU voltage
Nickel Plated Fittings -not the easily breakable plastic fittings; built to last!
Easy to Install and Very Easy to Tune
The Only Direct Bolt-IN BCS for Genesis

A MBC allows you to run higher-than-stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job of this, but if boost is available under the MBC setting it will give you that full boost. For example, you set your MBC to 18psi because from 3000-6000rpm that's what you want, then at 7000rpm you want to run 16psi. With a MBC, you do not have this control, so you are forced to run 16psi through the entire rev range. With an electronic boost controller you could run 18psi from 3000-6000rpm and 16psi at 7000rpm because you can tune the boost map in the ECU to allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control.

Design

Revolutionizing the boost solenoid market, we have created model specific install brackets that allow you to directly fit our boost solenoid into your Genesis. No more Zip-tying, we've give you the factory fitment you have been asking for! Staying with the OEM fitment theme, our boost solenoid uses a Hyundai-style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting and crimping OEM wires together! In addition we have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don't have to worry about them snapping off like other plastic hose fittings. MAC Valve designed a completely custom valve for our BCS' that cannot be found anywhere else in the automotive
SKU 057026
 
Our price: $110.00
Qty
Add to wish list
: *
: *
: *
Type the characters you see in the picture:


*
Tomei Grade C Main Bearing Mitsubishi Evolution VIII & IX
 
Varis Carbon Fiber Drink Holder Cover Nissan GT-R 2009-16
 
Motul 8100 0W40 X-Max Engine Oil 1 L
Tomei Grade C Main Bearing Mitsubishi Evolution VIII & IX
 
Varis Carbon Fiber Drink Holder Cover Nissan GT-R 2009-16
 
Motul 8100 0W40 X-Max Engine Oil 1 L
$33.00
 
$169.00
 
$16.20
 
COBB Tuning 5-Speed Front Shifter Bushing Subaru WRX 2002-14
 
Perrin Master Cylinder Brace Subaru BRZ / Scion FR-S 2013-15
 
GTC / Linney Speed Density – Kit A Nissan GT-R 2008-17
COBB Tuning 5-Speed Front Shifter Bushing Subaru WRX 2002-14
 
Perrin Master Cylinder Brace Subaru BRZ / Scion FR-S 2013-15
 
GTC / Linney Speed Density – Kit A Nissan GT-R 2008-17
$35.00
 
$95.40
 
$400.00
 
Project Mu Brake Pads NS -Front- Infiniti G37 2009-13
 
Project Mu Brake Pads HC+800 -Front- Subaru BRZ / Scion FR-S 2013-15
 
Project Mu Brake Pads HC+800 -Rear- Subaru WRX 2008-14
Project Mu Brake Pads NS -Front- Infiniti G37 2009-13
 
Project Mu Brake Pads HC+800 -Front- Subaru BRZ / Scion FR-S 2013-15
 
Project Mu Brake Pads HC+800 -Rear- Subaru WRX 2008-14
$127.30
 
$127.30
 
$84.55