Home :: Nissan :: GT-R :: Engine :: Oil Pans :: GT1R CNC Engine Oil Pan + Oil Pickup Adapter

GT1R CNC Engine Oil Pan + Oil Pickup Adapter

GT1R CNC Engine Oil Pan + Oil Pickup Adapter
Overall, the GTR and VR38 are amazing and work extremely well from the factory, but that's not to say they cannot be improved.

At high engine speeds (over 7500rpm), there is considerable windage in the crankcase. This causes aeration in the oil and the result is the oil pump ingesting air bubbles rather than pure oil. When an oil pump takes in air instead of oil, it is NOT GOOD for the engine.

Below you can see two examples of the difference in oil pressure at higher RPM before and after this kit is installed. Both tests were performed in house on two of our cars.
Another shortcoming with the stock pan is under high G’s, the oil is forced away from the oil pickup and again, you get air instead of oil.

Most very high performance applications use a dry sump oiling system, which prevents these problems. Unfortunately changing the VR38 over to a dry sump oiling system is a very big and expensive job, so it’s not ideal for many people. The GT1R CNC oil pan and pickup adapter is a great alternative.

We began development of this oil pan in early 2015, with various sheet metal samples being built before finalizing the design and moving it over to a CNC piece. By increasing the depth of the pan and optimizing the oil pickup location, we were able to increase the capacity by 1.5 quarts and get the oil pickup into a better position for high G acceleration.

The pan requires trimming the first layer of the plastic under-panel that goes under the oil pan. This panel has two layers, so the bottom layer stays in tact and fully covers the oil pan.

This kit includes the GT1R CNC Oil Pan and CNC Oil Pickup Adapter. The oil pickup adapter replaces the factory gasket with an o-ring on each end, for improved sealing and ease of install, and includes all new hardware necessary.

**Note – this oil pan CAN be installed with the engine still in the car. The rear pan bolts are close the sub-frame. They are easiest accessed using a low profile ¼” drive swivel 10mm socket.*
SKU GT1R CNC Oil Pan
 
Our price: $795.00
Qty
Add to wish list
: *
: *
: *
Type the characters you see in the picture:


*
Carbotech XP8 Rear Brake Pads BMW E92 335i 2007-2009
 
Dodson Carbon Cooling Panel Nissan GT-R 2009-16
 
Dodson Oil Filler Cap Nissan GT-R 2009-17
Carbotech XP8 Rear Brake Pads BMW E92 335i 2007-2009
 
Dodson Carbon Cooling Panel Nissan GT-R 2009-16
 
Dodson Oil Filler Cap Nissan GT-R 2009-17
$181.00
 
$206.20
 
$31.36
 
DBA 4000 Series T-Slot Front Rotors Subaru BRZ / Scion FR-S
 
GrimmSpeed Crank Pulley Removal Tool
 
COBB Tuning 1000cc Fuel Injectors Nissan GT-R 2008-17
DBA 4000 Series T-Slot Front Rotors Subaru BRZ / Scion FR-S
 
GrimmSpeed Crank Pulley Removal Tool
 
COBB Tuning 1000cc Fuel Injectors Nissan GT-R 2008-17
$299.68
 
$50.00
 
$810.00
 
Muteki Classic Lug Nuts Short Closed End - Red -
 
GReddy X Rocket Bunny 86 Aero, Ver.1 -Rear Under Diffuser - ONLY - Subaru BRZ / Scion FR-S 2013-15
 
Cobb High Flow Filter Subaru WRX & STi 2002-07
Muteki Classic Lug Nuts Short Closed End - Red -
 
GReddy X Rocket Bunny 86 Aero, Ver.1 -Rear Under Diffuser - ONLY - Subaru BRZ / Scion FR-S 2013-15
 
Cobb High Flow Filter Subaru WRX & STi 2002-07
$61.75
 
$560.00
 
$59.00